Partial Replacement of Cement with Kota Stone Slurry Powder and Coal Ash in High Performance Concrete

  • Mehtab Alam, Hemant Kumar Sain
Keywords: Concrete, Coal ash, Kota stone slurry powder, Workability, Compressive Strength, Flexural Strength, Splitting Tensile Strength.

Abstract

This examination is for assessing, mineral admixture, such as , Coal ash and Kota stone slurry powder , influence in solid when it is blended in bond concrete for usefulness, solidness and quality of solid utilizing OPC (43 grade). Coal ash is strengthening cementations material and Kota stone slurryis pozzolanic materials that can be used to make profoundly sturdy solid composites. In this examination Coal ash has been utilized to supplant OPC which fluctuates from 2.5% to 10% at interim of 2.5% by absolute load of OPC and comparably bond has been supplant by Kota stone slurry which differs 5% to 20% at interim of 5% by all out weight of OPC.. This examination researches the exhibition of cement under impact of Coal ash and Kota stone slurry powderas far as droop, Compressive quality 7 days and 28 days utilizing block (150mm x 150mm x 150mm) example, Flexural quality for 28 days utilizing shaft (700mm x 150mm x 150mm) and part rigidity for 28 days utilizing chamber (300mm length x 150mm distance across) were evaluated for this investigation by throwing these in establishment lab. All these solid examples were relieved for 7 days and 28 days in profound water tank on ordinary 27+20C degree air temperature.

Published
2021-12-01
How to Cite
Hemant Kumar Sain, M. A. (2021). Partial Replacement of Cement with Kota Stone Slurry Powder and Coal Ash in High Performance Concrete. Design Engineering, 1094-1102. Retrieved from http://www.thedesignengineering.com/index.php/DE/article/view/7053
Section
Articles