Performance Analysis and Simulation of Spiral Bevel Gearat Different Load

  • Sunil Padole, Dr. Ravindra Pathak

Abstract

 In this paper solid model of spiral bevel gear and pinion is generated and simulated at different Load. An experimental test is done. Transmission error, contact pattern is obtained. Comparison between measure and simulated transmission error is done. Contact Area during mesh is measured. It is reduced as the load is decreased. Torque is directly proportional to Maximum Line Load.

Published
2021-11-18
How to Cite
Sunil Padole, Dr. Ravindra Pathak. (2021). Performance Analysis and Simulation of Spiral Bevel Gearat Different Load. Design Engineering, 12877 - 12887. Retrieved from http://www.thedesignengineering.com/index.php/DE/article/view/6408
Section
Articles